Single sink drain connectionGive CALLAWAY Plumbing and Drains Ltd. a call to connect your new single kitchen sink for you. Or try it yourself, connecting new ABS piping for a single kitchen sink is not too difficult however it does take a little bit of knowledge, skill and the proper tools.

First at the plumbing store you will need to purchase a few items.

1.  Approximately 2 feet of 1.5″ ABS pipe, some 1.5″ ABS fittings please refer to diagram and some ABS glue.

2.  With a tape measure and a hacksaw measure then cut the required lengths of pipe and fit them together without any glue.

3.  Now that you have everything connected then disconnect and glue each piece one by one, all the nuts should only need to be just a little more than hand tight (over tightening might crack the fittings).

4.  You are almost finished, time to water test, first use just running water and then check for leaks then fill the sink about a 1/4 full and then release check again to ensure no leaks.

If this is a little more than you are wanting to do or are having leaks CALLAWAY Plumbing and Drains Ltd. is always available to take over the job and complete.

Help is just a Call-A-Way!
250.216.7159