Double sink drain connectionGive CALLAWAY Plumbing and Drains Ltd. to connect your new double kitchen sink for you. Or try it yourself, connecting new ABS piping for a double kitchen sink is not to difficult however it does take a little bit of knowledge, skill and the proper tools.

First at the plumbing store you will need to purchase a few items.

1.  Approximately 3 feet of 1.5″ ABS pipe, some ABS fittings, please refer to diagram and some ABS glue.

2.  With a tape measure and a hacksaw measure then cut the required lengths of pipe and fit them together without any glue.

3.  Now that you have everything connected now disconnect and glue each piece one by one, all the nuts should only need to be just a little more than hand tight (over tightening might crack the fittings).

4.  You are almost finished, time to water test, first use just running water in each sink and look at the plumbing to make sure there is no leaks then fill each about a 1/4 of the way and release each sink separately and then check again to ensure no leaks.

If this is a little more than you are wanting to do or are having leaks CALLAWAY Plumbing and Drains Ltd. is always available to take over the job and complete.

Help is just a Call-A-Way!
250.216.7159